Home 中文

Solutions

Stored energy solutions for a demanding world

Battery Racks & Accessories

Narada offers a complete line of standard and seismic racks designed and built exclusively for Narada standby power batteries.

Narada battery racks mainly can be divided into three groups:

1. Standard racks for both 48V and high voltage system with cell restraint equipment and electricity insulation.

2. Seismic racks for both 48V and high voltage system are designed to meet Zone 4 requirement, e.g. the Uniform Building Code (UBC), or Bellcore Network Equipment-Building System (NEBS) requirement, Telecordia standard.

3. Vertical battery racks are designed for both tubular flooded and gel batteries. The racks comply with IEEE693, NEBS, Telecordia, UBC standards for substations, Telecom, Switchgear and UPS applications.


Main concerns and advantages of Narada battery racks:

Cell restraint equipment is offered for standard racks to provide shock protection.

All shock protected and seismic racks are supplied with anti-static spacers and cell clamps to minimize cell damage caused by an earthquake.

For additional protection, all racks can be installed with a rubber coating for electricity insulation in the event of a spill and short circuit.



Full solutions for various battery rack requirements:

1. Standard 48V rack for 2V type battery

   Horizontal cell position

   Equipped with cell restraint and insulated connector

   Tiers and rows can be customized

1439737403135606498E.jpg143973740587104949A9.jpg



2. Standard high voltage racks for 2V type battery

   Horizontal cell position

   Equipped with cell restraint and insulated connector

   Tiers and rows are customized

1439736842133265BBBA.jpg1439736842133265BC30.jpg


 


3. Seismic 48V rack for 2V type battery

   Horizontal cell position in cell clamps

   Equipped with cell restraint and insulated connector

   Tiers and rows can be customized

14397369331120281F09.jpg14397369331120281F87.jpg



4. Seismic high voltage rack for 2V type battery

   Horizontal cell position in cell clamps

   Equipped with cell restraint and insulated connector

   Tiers and rows can be customized

1439736966872813A0C8.jpg1439737168123815B4DA.jpg


 

5. Standard 12V battery rack for both 48V and high voltage rack

   Equipped with cell restraint and insulated connector

   Tiers and rows can be customized

14397370079535843FE5.jpg14397370085578644332.jpg


 

6. Vertical rack for both tubular flooded and gel battery

   Both standard & seismic racks are available

   Vertical cell position

   Equipped with cell restraint and insulated connector

   Tiers and rows can be customized

1439737057660451p27B.jpg